Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 201

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
1) This is a Fabric wide configuration. All the switches in the
2) SanOS 3.2.x switches CANNOT be added to the Fabric after Version2
3) If enabled, Version2 mode CANNOT be disabled till all FC-Redirect
4) 'write erase' will NOT disable this command. After 'write erase'
Do you want to continue? (Yes/No) [No]Yes
Before proceeding further, please check the following:
1) All the switches in the fabric are seen in the output of
2) All switches in the fabric are running SanOS version 3.3.x or
3) Please make sure the Fabric is stable ie.,
Do you want to continue? (Yes/No) [No] Yes
Related Commands Command
no fc-redirect version2 enable mode
OL-18091-01, Cisco MDS NX-OS Release 4.x
fabric will be configured in Version2 mode.Any new switches
added to the fabric will automatically be configured in version2
mode.
mode is enabled. If any 3.2.x switch is added when Version2 mode
is enabled, all further FC-Redirect Configuration changes will Fail
across the fabric. This could lead to traffic disruption for
applications like SME.
configurations are deleted. FC-Redirect configurations can be
deleted ONLY after all the relevant application configurations
are deleted. Please use the command 'show fc-redirect configs'
to see the list of applications that created FC-Redirect
configurations.
on ANY switch in the fabric, the user needs to do:
'clear fc-redirect decommission-switch'
on that that switch. Without that, if the user moves the switch
to a different fabric it will try to convert all the switches
in the fabric to Version2 mode automatically. This might lead
to Error conditions and hence Traffic disruption.
'show fc-redirect peer-switches' command and are in 'UP' state.
higher.
No fabric changes/upgrades in progress
Description
Disables version2 mode in FC-Redirect.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
fc-redirect version2 enable
A-13