Replacing Smart Cards; Standard Mode - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Key Management Operations
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Replacing Smart Cards

This section describes how to replace smart cards for clusters in the following modes.
•
•

Standard Mode

In Standard security mode, the master key can be downloaded to a replacement smart card from the
Fabric Manager Web Client.
To replace a smart card (Standard security mode), follow these steps:
Select Smartcards to display the smart card information for the cluster.
Step 1
Click Replace to launch the smart card replacement wizard. Click Next.
Step 2
Insert the smart card and enter the password, PIN, and label for the smart card. Click Next.
Step 3
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
6-22
Standard Mode, page 6-22
Advanced Mode, page 6-24
Chapter 6 Cisco SME Key Management
OL-18091-01, Cisco MDS NX-OS Release 4.x