Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 239

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-device
To configure a crypto tape device, use the tape-device command. To disable this feature, use the no form
of the command.
Syntax Description
device name
Defaults None.
Command Modes Cisco SME tape volume configuration submode.
Command History Release
3.2(2c)
Usage Guidelines The tape device commands are available in the (config-sme-cl-tape-bkgrp-tapedevice) submode.
Examples The following example configures a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
The following example removes a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# no tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
Related Commands Command
clear sme
show sme cluster
show sme cluster tape
OL-18091-01, Cisco MDS NX-OS Release 4.x
tape-device device name
no tape-device device name
Specifies the name of the tape device.
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about the Cisco SME cluster.
Displays information about all tape volume groups or a specific group.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
tape-device
A-51