Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 241

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-volgrp
To configure the crypto tape volume group, use the tape-volgrp command. To disable this command,
use the no form of the command.
Syntax Description
group name
Defaults None.
Command Modes Cisco SME crypto backup tape group configuration submode.
Command History Release
3.2(2c)
Usage Guidelines The tape volume group commands are available in the Cisco SME crypto tape volume group
(config-sme-cl-tape-bkgrp-volgrp) submode.
Examples The following example configures a crypto tape volume group:
switch# config t
switch(config))# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# tape-volgrp tv1
switch(config-sme-cl-tape-bkgrp-volgrp)#
The following example removes a crypto tape volume group.
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# no tape-volgrp tv1
Related Commands Command
clear sme
show sme cluster tape
OL-18091-01, Cisco MDS NX-OS Release 4.x
tape-volgrp group name
no tape-volgrp group name
Specifies the tape volume group name.
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about tapes.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
tape-volgrp
A-53