Creating Reports; Displaying The Switch Health Report - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
Creating Reports
Displaying the Switch Health Report
Fabric Manager creates a switch health report that is Web-based. The report displays the switch state
contributors, the status, and the IP address of the switch. Note that this is a static report and not a
dynamic view of the switch. See the Web Tools Administrator's Guide for additional information.
The switch health report is available only for switches running the following firmware versions:
•
Fabric OS v3.2.x or higher
•
Fabric OS v4.4.x or higher
•
Fabric OS v5.0.0 or higher
For other switches, either the switch reports option is disabled or an error message is displayed.
To display the switch health report
1.
Select a switch and click Reports > Switch Health Reports from the Menu bar.
You can also right-click a switch and select Health Report from the context menu.
The Switch Health Report displays, as shown in
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Figure
22-1.
Chapter
22
22-1
Advertisement
Table of Contents
Troubleshooting
