Creating A Login Banner - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
To capture supportShow information
1.
Launch the Server Management Console.
2.
Click the SupportShow tab.
3.
Click Browse to select the path where the supportShow data will be saved.
4.
Click Capture Technical Support Information.
The Server Management Console displays the following confirmation message when the capture is
complete:
Creating a Login Banner
You can configure a login banner that displays after you successfully log in to Fabric Manager (see
Figure
If you configure a login banner, then after a user successfully logs in to Fabric Manager, the Fabric
Manager client displays the login banner dialog with two buttons. If the user clicks Agree and
continue, the client proceeds as usual; if the user clicks Disagree and exit, the client closes.
Figure 24-6 Login Banner
The BannerMessage tab of the Server Management Console allows you to create and edit this banner.
If the Database Server is not running, you cannot edit the banner.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
24-6). By default, no banner is set up.
Creating a Login Banner
24
24-7
Advertisement
Table of Contents
Troubleshooting
