Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 275

Some cells for the SilkWorm 24000 and 48000 switches are disabled.
•
•
Figure 18-1 Editing the Port Connectivity Configuration
2. You can use the Edit FICON CUP Port Connectivity Configuration dialog to:
•
•
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Editing the Current Port Connectivity Configuration
For SilkWorm 24000 switches, disabled cells are those with 7E in the Area ID column or 10/14
in the Port column.
For SilkWorm 48000 switches, disabled cells are those with FE or FF in the Area ID column or
10/30 in the Port column.
Block a port
-
To block a port, click the checkbox in the Block column corresponding to that port.
-
To block all ports, click the Block All checkbox.
Prohibit a port
-
To prohibit all ports from communicating with one another, click the Prohibit All
checkbox.
-
To prohibit a port from communicating with all other ports, click the checkbox in the
Prohibit column corresponding to that port. All the affected ports then display the (
icon automatically in the matrix.
-
To allow a port to communicate with all other ports, uncheck the checkbox in the Prohibit
column corresponding to that port.
-
To allow or prohibit communication between specific ports, click the cells in the matrix. If
you click one of the (
automatically.
) icons, the corresponding prohibit checkbox is unchecked
18
)
18-3