Configuring Fcs Policy Options - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
17
Using the Policy Editor
Figure 17-3 Policy Editor (Summary Tab)
Configuring FCS Policy Options
Switches in your Fabric Configuration Server (FCS) policy serve as trusted switches. Use the following
procedure to display these switches and to add, remove, or reorder switches in the policy.
To configure/edit the FCS policy
1.
In the Information Panel, right-click the secure fabric for which you want to set policies and choose
Security > Security Policy Editor from the context menu.
The Policy Editor appears (see
2.
Click the FCS tab (see
All switches in the selected fabric are displayed in the Available Switch List, and the currently
selected FCS switches display in the FCS Switch List.
The first switch listed in the FCS Switch List serves as the primary FCS (from which you can
configure your fabric), and any subsequent switches serve as a backup FCS. The order in which
switches appear in the FCS Switch List represents a chain where each backup switch takes over as
the primary FCS if the preceding primary FCS fails.
17-4
Figure 17-3 on page
17-4).
Figure 17-4 on page
17-5).
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Advertisement
Table of Contents
Troubleshooting
