Backing Up And Restoring The Database - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
Backing Up and Restoring the Database
The Database tab of the Server Management Console allows you to backup and restore the Fabric
Manager database (fabmandb). The Database Server must be running when you backup the database,
and it must be stopped when you restore the database.
Note
You should periodically back up the database for disaster recovery and so that the database transaction
log does not get too large.
Figure 24-4 Server Management Console, Database Tab
To backup the database
1.
Launch the Server Management Console.
2.
Click the Database tab.
3.
Click Backup Database.
The Database Backup window displays.
4.
Click Browse to select the location where the database will be backed up.
5.
Click Backup.
Upon completion, a window displays the files that were backed up.
6.
Click OK to close the window.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Backing Up and Restoring the Database
24
24-5
Advertisement
Table of Contents
Troubleshooting
