Identifying Ports That Completed The Rnid Exchange - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
18
Identifying Ports That Completed the RNID Exchange
Figure 18-4 Web Tools Switch Admin Module, Configure Tab
Identifying Ports That Completed the RNID Exchange
The following procedure describes how to identify ports that have completed the request node
identification (RNID) exchange.
To identify ports that have completed the RNID exchange
1.
Launch the FC Port Connectivity View, as described in
or access the FC Devices tab in the Information panel.
2.
Scroll to the right in the FC Port Connectivity View or FC Devices tab to locate the Capability
column.
The Capability column identifies ports that have completed the RNID exchange with a value of
FICON.
18-8
"Viewing Port Information" on page
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
11-4,
Advertisement
Table of Contents
Troubleshooting
