Figure 18-3 Information Panel Showing IDID Mode
To configure IDID mode on a switch
1.
Right-click a switch and select Insistent Domain ID(IDID) from the context menu. Note that this
menu item is available only for switches running Fabric OS 5.0.x or higher.
A confirmation dialog warns you that the switch will be disabled and asks if you want to continue.
2.
Click Yes in the confirmation dialog.
The switch is disabled, and Web Tools launches and displays the Configure tab of the Switch
Admin module (see
instructions on using Web Tools to set the IDID mode.
Afterwards, you must manually enable the switch using either Web Tools or Fabric Manager.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Configuring Insistent Domain ID Mode
Figure 18-4 on page
18-8). See the Web Tools Administrator's Guide for
18
18-7