Configuring Call Home - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

Configuring Call Home

Each call home configuration you create acts independently without impacting any other configuration.
If you set up a call home configuration to send an email message, you need to also set up the notification
parameters. See
notification parameters for call home and change management. If you have not already set up the
notification parameters, the Call Home Configuration wizard prompts you to do so.
If you set up a call home configuration to capture supportSave or supportShow information, you must
configure the FTP parameters before configuring call home. See
on page 14-9
To set up a call home configuration
1. Click Tasks > Call Home > Create or Edit configuration.
The Call Home window displays, as shown in
Figure 10-1 Call Home Dialog
2. Click Add.
The Call Home Configuration wizard is launched (see
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
"Configuring Notification Parameters" on page 7-13
for instructions on configuring the FTP server.
Configuring Call Home
for instructions on setting the
"Configuring File Transfer Options"
Figure 10-1.
Figure 10-2 on page
10
10-4).
10-3