Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 51

If you selected Yes:
a.
b.
c.
d.
e.
4. Select the version you want to install (Full or Evaluation); then click Next.
5. Either enter a serial number and license key, or accept the license agreement, depending on whether
the full or evaluation version is selected.
•
•
6. Click Next.
The Introduction window appears.
7. Read the introduction; then click Next.
The Select Destination Folder window appears.
8. Use the default location, or click Choose to select a new folder.
You can also type a new destination folder. The path must not contain spaces. Alpha-numeric
characters, dash, and underscore are the only characters allowed.
9. Click Next.
The Select FTP Server window appears.
10. Select whether to use the built-in FTP server or your own external FTP server.
The FTP server is used primarily for firmware download. To use the Fabric Manager firmware
repository, you must either select the built-in FTP server or, if you select the external FTP server,
ensure that your FTP server resides on the same system as the Fabric Manager server.
The built-in FTP server is always installed, regardless of which option you select. If you select the
external FTP server, the built-in FTP server is disabled.
After installation, you can change which FTP server to use at any time, as described in
"Configuring File Transfer Options" on page
11. Click Install.
Fabric Manager is installed on your machine.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Select whether you have client, server, or both installed and click Next.
Identify the location where the previous Fabric Manager client is installed and click Next.
Identify the location where the previous Fabric Manager server is installed and click Next.
The install wizard provides you the choice of migrating your existing database automatically,
or removing it.
Click Yes if you want to update to the new database and automatically save your existing data,
or click No to remove your current data and create the new database.
Click Next.
Full version only: Type a valid serial number and license key.
The serial number and license key are verified at this time. If the serial number or license key
is invalid, an error message displays and you must re-enter them. You cannot continue
installing the full version without a valid serial number and license key.
Evaluation version only: Accept the license agreement.
Note
This document uses <installdir> to indicate the folder where Fabric Manager is installed.
Installing the Fabric Manager Server
14-9.
2
2-15