Adding Third-Party Management Applications - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
21
Accessing Third-Party Management Applications
Adding Third-Party Management Applications
You can add up to three management applications to a fabric or switch. They can be either .exe files
located on the Fabric Manager client system, or URLs to the application.
To add third-party applications to the list
1.
In the Information Panel, right-click the fabric or switch to which you want the application
associated and choose Management Application > Configure from the context menu.
The Configure Application window appears.
Figure 21-2 Configure Application Window
2.
Click Add.
The Add Application window appears.
Figure 21-3 Add Application Window
3.
Type a name for the application.
The name is what appears in the Launch submenu and does not have to be the same as the
application name.
4.
If you are adding a program located on your local hard disk, do the following:
a.
b.
21-2
Select the Executable radio button.
Click Browse to locate the application and click Open.
Executables must reside on the Fabric Manager client system.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Advertisement
Table of Contents
Troubleshooting
