Identifying Port Zone Conflicts; Configuring Insistent Domain Id Mode - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

18

Identifying Port Zone Conflicts

Identifying Port Zone Conflicts
Fabric Manager identifies ports that cannot communicate with each other due to zone conflicts. Zone
conflicts are identified as:
•
Port zone configurations: If two ports are not defined in the same zone, they cannot communicate
with each other. Fabric Manager can analyze port communication conflicts based on only on zones
defined by port name (not WWN).
•
Blocked port communication: You can block ports from communicating with each other using the
block feature in the Edit FICON CUP Port Connectivity Configuration dialog. By clicking a
combination of ports in the graph, you can block the port connectivity.
To display an analysis of which ports cannot communication with each other because of zone conflicts,
click the Analyze Zone Conflicts button in the Edit FICON CUP Port Connectivity Configuration
dialog. Fabric Manager displays the zone conflicts highlighted in red.
Note
The Analyze Zone Conflicts feature supports only switches running Fabric OS v4.4.0 or later.
You cannot use the Analyze Zone Conflicts feature in an Admin Domain-aware fabric.
To analyze port zone conflicts
1. Display the Edit FICON CUP Port Connectivity Configuration dialog for the active configuration,
as described in
configuration, as described in
2. Optional: Click the checkboxes for a combination of ports that you want to block. You can block as
many ports as you want.
3. Click Analyze Zone Conflict.
The Edit FICON CUP Port Connectivity Configuration dialog displays zone conflicts highlighted
in red.

Configuring Insistent Domain ID Mode

This section describes how to identify which switches have Insistent Domain ID (IDID) mode enabled
and how to enable or disable IDID mode on a switch.
When you configure IDID mode, Fabric Manager launches the Switch Admin module of Web Tools.
Web Tools automatically disables the switch. Afterwards, you must manually enable the switch.
To identify switches that have insistent domain ID (IDID) enabled
1. Select a switch from the View panel.
2. Click the Overview tab in the Information panel.
3. Scroll or use the Search function to locate "IDID" in the Property column.
The IDID property identifies switches that are IDID-enabled with a value of true.
18-6
"Editing the Current Port Connectivity Configuration" on page
"Editing a Stored Port Connectivity Configuration" on page
18-2, or for a stored
18-4.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP