Printing Snapshot And Change Reports; Changing Baseline Snapshot - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual
Brocade fabric manager administrator's guide (53-10000196-01-hp, november 2006)
Hide thumbs
Also See for A7990A - StorageWorks SAN Director 4/16 Blade Switch:
- Command reference manual (824 pages) ,
- Administrator's manual (308 pages) ,
- Reference (292 pages)
Table of Contents
Advertisement
4.
Open the file using one of these methods:
•
•
Printing Snapshot and Change Reports
Use the following procedure to print a snapshot or change report.
To print a snapshot or change report
1.
Click Tasks > Change Management > View CM reports.
The Change Management dialog displays with the View Change Reports and Snapshots tab
selected (see
2.
Select the fabric containing the snapshot or change report you want.
The Reports section for that switch displays a list of profiles and associated snapshots for that
fabric.
3.
Select a snapshot or change report, then click View (in the corresponding Snapshots or Change
Reports area).
The Change Report is displayed (see
4.
Click Print to print the snapshot or change report.
Changing Baseline Snapshot
You can assign an existing snapshot to be the new baseline snapshot using the following procedure.
To change a baseline snapshot
1.
Click Tasks > Change Management > View CM reports.
The Change Management dialog displays with the View Change Reports and Snapshots tab
selected (see
2.
Select the fabric containing the baseline snapshot you want.
The Reports section for that switch displays a list of profiles and associated snapshots for that
fabric.
3.
Select a snapshot (other than the baseline) that you want to select as the new baseline snapshot.
4.
Click Change Baseline.
A confirmation displays indicating that all previous change reports (compared to the previous
baseline) will be deleted.
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Click Open the file with the following stylesheet applied
The xslt file created by Fabric Manager is the default selected file. You can either use that file,
or navigate to another style sheet of your own. Click OK to display the information in an Excel
spreadsheet.
Click Open the file without applying a stylesheet (not recommended)
The information is displayed in an Excel spreadsheet without any formatting.
Figure 9-3 on page
9-7).
Figure 9-3 on page
9-7).
Using Snapshots and Change Reports
Figure 9-4 on page
9-8).
9
9-11
Advertisement
Table of Contents
Troubleshooting
