Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual page 268

17
Using the Policy Editor
Figure 17-10 Configuring the FCS or Non-FCS Admin Security Password
3. Type the current password in the FCS Administrator Password field.
4. Type the new password in the New Password field.
Passwords must be from 8 through 40 characters long and must differ from the old password by at
least one character. In addition, passwords must adhere to any additional conditions that you set up
through Web Tools or the command line interface.
5. Type the new password again in the Verify field.
6. Click FCS Switches to change the admin password for secure FCS switches only, or click Non-
FCS Switches to change the admin password for secure non-FCS switches only.
7. Click Change Password.
8. Click the Summary tab.
9. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog displays.
10. After reviewing the Security Policy, click one of the following:
•
•
•
17-16
Continue (to continue applying your changes)
Cancel (to cancel your changes)
Copy to File (to copy the Security Policy to a file)
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP