Generating Reports And Graphs From Templates - Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Administrator's Manual

8
Creating and Using Report Templates
7. Click Last, type a number, and then select the time increment (Minutes, Hours, or Days).
8. Select the granularity (the time interval between samples) from the Granularity drop-down list.
The available options are 5 minutes, 30 minutes, 2 hours, and 1 day. See
for information on how granularity is calculated.
9. For Port Statistics reports only (skip to
for which you want to generate the report:
•
•
•
10. Click Create Template.
The Save Template dialog appears (see
Figure 8-10 Save Template
11. Type a name for the report or graph template; then click OK.

Generating Reports and Graphs from Templates

The Performance Monitor feature has a set of six templates (by default) that are useful if you need to
generate an ongoing report without a specified time interval.
templates.
8-16
Click All.
Includes all ports in the database with the specified granularity and time range.
Click Device Ports Only.
Incudes only device ports (F_Ports and L_Ports) in the database with the specified granularity
and time range.
Click ISL Ports Only.
Includes only ISL ports (EX_Ports and E_Ports) in the database with the specified granularity
and time range.
Note
If the port type of a switch in a fabric changes, and Performance Monitor is enabled,
multiple port WWNs with different port types are displayed in the Performance Monitor
table and graph reports.
step 10 for End-to-End monitoring reports). Select the ports
Figure 8-10).
Table 8-2 on page 8-5
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
"Granularity" on page 8-3
lists the default