Note
You can activate a stored port connectivity configuration only for FMS-enabled switches running
Fabric OS v4.4.0 or later.
Users with roles of user or basicswitchadmin can only view the port connectivity configuration. Users
with the role of zoneadmin cannot access the port connectivity configuration. All other user roles can
view and modify the port connectivity configuration.
To view and edit a stored port connectivity configuration
1.
In the View panel or Information panel, right-click a switch that has FMS mode enabled and select
Port Address Configuration > Stored from the context menu.
The FICON CUP Port Connectivity Configurations dialog displays (see
Figure 18-2 Activating a Stored Port Connectivity Configuration
2.
Select a configuration from the CUP Port Connectivity Configurations dialog and do any of the
following:
•
•
•
•
•
•
Fabric Manager Administrator's Guide
Publication Number: 53-1000196-01-HP
Click Activate to activate the stored configuration.
Click New to create a new configuration. This launches the Edit FICON CUP Port
Connectivity Configurations dialog (see
Click Edit to edit the selected configuration. This launches the Edit CUP Port Connectivity
Configurations dialog (see
Figure 18-1 on page
Click Delete to delete the selected configuration.
You cannot delete the initial IPL configuration; you can, however, delete all user-created
configurations.
Click Copy to copy the selected configuration and save it under a different name.
Click Close to exit the dialog.
Editing a Stored Port Connectivity Configuration
Figure 18-1 on page
18-3).
18
Figure
18-2).
18-3).
18-5