Fabric Os Commands Related To Ficon And Ficon Cup - HP A7533A - Brocade 4Gb SAN Switch Base User Manual

Table 18

Fabric OS commands related to FICON and FICON CUP

Command
Standard Fabric OS commands:
configure
portSwap
portSwapDisable
portSwapEnable
portSwapShow
Commands specific to FICON:
ficonclear rlir
ficonclear rnid
ficonshow ilir
[fabric]
ficonshow lirr
[fabric]
ficonshow rlir
[fabric]
ficonshow rnid
[fabric]
ficonshow switchrnid
[fabric]
Commands specific to FICON CUP:
ficoncupset fmsmode
ficoncupset modereg
ficoncupshow fmsmode
ficoncupshow modereg
The Fabric OS CLI supports only a subset of the HP management features for FICON fabrics. The full set of
FICON CUP administrative procedures is available using the HP Fabric Manager and Advanced Web
Tools software features. You can also use an SNMP agent and the FICON MIB. For information on these
tools, see:
• Advanced Web Tools: HP StorageWorks Fabric OS 5.x Advanced Web Tools administrator guide
Fabric Manager: HP StorageWorks Fabric Manager 5.x administrator guide
•
• SNMP Agent and FICON MIB: HP StorageWorks Fabric OS 5.x MIB administrator guide
Description
Sets the domain ID and the IDID mode.
Swaps ports.
Disables the portSwap command.
Enables the portSwap command.
Displays information about swapped ports.
Removes all registered link incident records (RLIRs) from the local RLIR
database.
Removes all outdated RNID records from the local RNID database.
Displays FRU failure information on the local switch or on the fabric.
Displays registered listeners for link incidents for the local switch or for
the fabric.
Displays link incidents for the local switch or for the fabric.
Displays node identification data for all devices registered with the local
switch or all devices registered with all switches defined in the fabric.
Displays node identification data for the local switch or for the fabric.
Sets FICON Management Server mode on or off for the switch.
Sets the mode register bits for the switch.
Displays the FICON Management Server mode setting for the switch.
Displays the mode register bit settings for the switch.
Fabric OS 5.x administrator guide 107