Disassembly and Assembly
3.2.3 Removing the Housing
This section describes how to remove the housing.
the Top Cover
3.2.3.1 Removing
Two people are required to remove the top cover; one person must hold the top cover while the
other person removes the screws. If the top cover is not supported while the screws are removed,
the weight of the top cover may damage the rear hinges.
1. Open the top cover.
While someone supports the top cover, remove the4 screws (2 on therightand 2 on the left)
2.
securing the top cover to the hinges and remove the cover.
3-1o
Figure 3-10. Removing the Top Cover
Rev. A