Labels
Paper path:
Label size (W x H):
Bottom carrier:
Width
Length
Total thickness:
Label examples:
When using labels, do not use the paper select (change tractors) or tear oflfinction; to avoid a
paper jam, it is important not to feed label forms backward.
Notes:
1.
Load label forms only onto the front tractor. The paper select function must not be used.
2.
Feed label forms only in the forward direction, using the forward-feeding MICRO FEED
button
Do not feed label forms in the reverse direction. (Feeding label forms backward
(A).
may cause a paper jam, or the labels may come off the backing and stick to the printer.)
When using label forms, do not use the TOF (top of form) function.
3.
4.
Do not use easy-peel labels.
Label comers must be rounded.
5.
6.
The labels and the bottom carrier should have no folds or creases.
Labels must be on carrier paper, and there should be carrier paper between the labels. (The
7.
labels should not touch each other.)
The label surface must be flat.
8.
Rev.
Front only
4 x 15/16 inches
4 x 17/16 inches
4- 16 inches
3.5 inches minimum
0.19 mm (0.0075 inches) maximum
Differences in thickness must be less than 0.12 mm (0.0047 inches).
Avery continuous form labels
Avery mini-line labels
o II
II
I
0
II
I
0
0
0
II
0
0
Inside of each. label
Figure 1-20. Printable Area for Labels
Product Description
I 10
o
I
I 10
0
11
A