Figure 3-42. Removing The Tension Roller Shaft - Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer Service Manual

Disassembly and Assembly
5. Remove the E-ring on the right side of the tension roller shaft and pull out the platen roller
shaft holder with its leaf spring and washer.
R
Figure 3-41.
Removing the Shaft Holder
6. Remove the E-ring on the left side of the tension roller shaft and pull out the shaft holder.
Then remove the tension roller shaft by pulling it right.

Figure 3-42. Removing the Tension Roller Shaft

Rev. A
3-32