Disassembly and Assembly
3.2.7.9 Removing the Paper Jam Sensor
1.
Remove the platen along with the lower paper guide. (Refer to Section 3.2.7.8)
2. Remove the left part of the lower paper guide. (The lower paper guide consists of three parts.)
3. Remove the CPN (SP) (M4 x 7) screw securing the left part of the lower paper guide to the
platen.
Figure 3-44. Removing the Left Part of Lower Paper Guide
3. Unhook the paper jam sensor (magnetic transistor) cover and remove the cover.
4. Remove the paper jam sensor.
PAP
COVER
Figure 3-45. Removing the Paper Jam Sensor
When you attach the paper jam sensor to the right part of the lower paper guide, make sure it is
oriented correctly (jiont to back).
3-34
LOWER P(PER GUIDE (LEFT)
OR
Rev. A