3.2.7.8 Removing tha Platen
1.
Remove the paper bail assembly. (Refer to Section 3Q.7.5)
2. Remove the upper paper guide. (Refer to Section 32.7.6)
3. Remove the 4 hexagon screws securing the platen to both holders. Then remove the platen
with the lower paper guide.
4. Slide the notches of the lower paper guide to the right and remove the paper guide from the
platen. (l%e lower paper guide consists of three parts.)
PLATEN HOLDER (LEFT)
guide and work toward the right.
Rev.
Figure 3-43. Removing the Platen
Disassembly and Assambiy
PLATEN HOLDER (RIGHT)