Disassembly and blssambly
3.2.4 Removing the Circuit Boards
This section describes how to remove the circuit boards.
3.2.4.1 Removing the Bottom Panel Assembly
below. Refo to Section 3.2.3.1 for instructions on removing the top cover.
weight on the top cover or any other printer components.
between the lower case and bottom panel.
2. Open the rear cover. Remove the4CPB (M3
12) screws and 2 CPT(0) (IWI x 12)screws
x
securing the interface cover and remove the cover.
3. Remove the 2 CPT (0) (M3 x 12) screws securing the optional interfa~ cover and remove the
cover.
CPT (0) (M3x12)
,11
II
/
CPB
Figure 3-18. Removing the Interface Cover
Rev. A
3-15