Figure 1-17. Stapled Area - Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer Service Manual

7. The binding area must be fiat. Figure 1-17 shows a cross section of the stapled area.
8. Never use forms joined with metal staples.
9. The binding (dots of paste or paper staples) must be outside the printable area.
10. Overlapping multi-part forms must be bound at the top side by spot gluing. The binding must
be secure and there should be no spilled giue. Figure 1-18 shows the correct multi-part form
binding method.
11. Multi-part firm sheets should be securely bound to each other, and the binding area must not
be too large.
Figure 1-18. Correct Muiti-part Form Binding
Fanfold Paper with a Labal
Paper path:
Quality:
Width:
Total thickness:
Weight:
Single
Multi-part
Figure 1-19. Printabie Area for Fanfoid Paper with a Labei
1-1o
NG

Figure 1-17. Stapled Area 3

Front only
Plain paper
101-406 mm (4 - 16 inches)
0.46 mm (0.018 inches) rruximum
4 5 - 70kg(14- 221b)
35- 48kg (11 -15 lb) x n (n < 8), up tothe total thickness
No
01
A
Rev. A