Disassembly and Assembly
the carriage damper from therightside frame, and remove the 3 CBS (0) (M4x 8)
7. Remove
screws securing the carnage motor holder to the right side frame.
Remove the right guide shaft holder lever.
8.
Remove the 2 CP (PS) (M4
9.
and remove the lever.
Figure 3-59. Removing the Right Side Frame
10. Remove the rear carriage guide shaft with the carriage base from the right side frame.
When you install the front carriage guide shafl, tighten the screws while pushing the shaft
toward the platen.
When you assemble the cam"age mechanism, perform the following adjustments:
3-44
securing the rear carriage guide parallelism adjust lever
x 6) screws
Rev. A