1.6.1 M-3CI 1 Printer Mechanism
The M-3C11 printer mechanism is a 9-pin, serial, dot matrix printer mechanism developed for the
and durable when compared with existing terminal printer mechanisms. Its paper feeding
mechanism uses fanfold paper, and an automatic mechanism is included to provide enhanced
paper handling.
The structural differences between the DFX-5000+ and the DFX-5000 are:
encoder plate was attached to the rotor of the CR motor, while the DFX-5000+ uses a belt-type
encoder.
changed to reduce noise.
attached to the pnnthead carriage.
Figure 1-27. M-3C11 Printer Mechanism
Rev. A
Product Description
1-27