Figure 3-2. Packing The Dfx - Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer Service Manual

Disassembly and Assembly
After attaching the packing materials, pack the printer in its container as shown in Figure 3-2. If
you do not pack the printer properly, it may be damaged during transportation.
Before disassembling the printer, turn it off and discomect the power cord from the printer
and the wall outlet. Discomect the printer
ribbon cartridge.
Because you may need to turn the printer while you disassemble or assemble it, place it on a
clean, thick cloth, such as a blanket, before starting.
Before assembling the printer, lubricate it as described @Chapter 6, Mainfenunce and
Lubrication. (A substantial amount of oil maybe removed during maintenance or repair work.)
Also, be sure to clean the printer as described in Chapter 6.
3-2

Figure 3-2. Packing the DFX-5000+

from the
computer, and then remove the paper and
Rev. A