Terminal Mode; Printing Selected Information - Eaton Powerware 9315 Operation Manual

7.6 Terminal Mode

In this mode, system events are continually logged through the serial port to the device
connected to the port. Port 2 operates by default in Terminal mode.
The printed log entries contain a time and date stamp and the alarm text message.
Terminal mode uses this format for printing alarm entries:
An alarm message is prefixed by the word "CLEAR" whenever an alarm is entered into the
Event History Log with a cleared status.

7.6.1 Printing Selected Information

If a port is operating in Terminal mode and is connected to a computer, you can use key
combinations at any time to print only selected information:
To use a key combination, hold down the Control key and press the letter key.
EATON Powerware 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com
®
MMM DD HH:MM:SS.hh
Symbol
MMM
DD
HH
MM
SS
hh
KYWD MESSAGE
::::
<CR>
<LF>
[Ctrl]+[P] Prints the entire log with a header
[Ctrl]+[M]
Prints the current system meters with a header
[Ctrl]+[A]
Prints all system information
[Ctrl]+[B] Prints the Battery Test Log
KYWD MESSAGE
Description
Month (3 letters)
Day (2 digits)
Hour (2 digits)
Minute (2 digits)
Second (2 digits)
Hundredths of Second (2 digits)
Keyword (ALARM, NOTICE, COMMAND, or STATUS)
System Diagnostic Information
Carriage Return Character (ASCII 13)
Line Feed (ASCII 10)
Communication
<CR> <LF>
::::
7-9