Installing The Postscript Printer Driver (Epl-6200 Only) - Epson EPL-6200 Reference Manual

7. Click OK on the Layout dialog box.
Note:
To edit the saved text watermark, select it from the List, and click Edit
Text in step 4 above.
Installing the PostScript printer driver (EPL-6200
only)
To print files in the Adobe PostScript 3 format in Mac OS 8.6 to
9.x and Mac OS X, version 10.2.x, you will have to install the
PostScript printer driver and screen fonts that are included in the
CD-ROM that shipped with your printer. See the appropriate
sections below for installation instructions according to the
operating system that you are using.
The Installer program that is included in the CD-ROM that
shipped with your printer installs the PostScript driver and the
screen fonts. Before installing the printer driver, make sure that
your hard disk has at least 3.1 MB of free space.
The installer program has two installation methods: Easy Install
and Custom Install.
Easy Install installs all the necessary files. Normally, you should
use the Easy Install method since this ensures that all necessary
files are copied and that your computer is set up to give you the
full benefit.
Custom Install installs only the files that you specify. You might
want to use the Custom Install method if you are low on hard disk
space and want to install only those files that are absolutely
required. However, if you have enough free disk space, it is
recommended that you choose the Easy Install method.
130
Using the Printer Driver For Macintosh