Choosing Printer Emulation - Epson EPL-6200 Reference Manual

Choosing printer emulation

You have to change the printer emulation mode through the
Remote Control Panel utility because the printer driver does not
give you access to this setting.
The standard supported emulation modes are: LJ4 (PCL5e), GL2,
FX, ESCP2, I239X, and PS3 (EPL-6200 only). You can specify a
different emulation for each interface; in other words, for each
computer you connect the printer to.
Note:
Settings made in the Remote Control Panel utility are not effective until
you click the Send to download the information to the printer. If you
share this printer, the settings shown on your Remote Control Panel
utility may not reflect the actual settings in the printer as they may have
been changed by other users. Even if the Remote Control Panel utility
already shows your desired setting, always click Send to ensure that
you can print with that setting.
Emulation button
Click Emulation on the Remote Control Panel screen and the
following dialog box appears:
262
Using the Remote Control Panel Utility (EPL-6200 only)