Epson EPL-6200 Reference Manual page 152

To confirm that the setup completed successfully, click Setup in
the Chooser dialog box, and then click Printer Info and Configure
to check the settings.
If the setup did not complete successfully, follow the steps below:
1. Return to the dialog box shown above.
2. Click Select PPD. The PPD selection dialog box will be
displayed.
3. Select EPL-6200 PS3, and then click Select.
If you need to cancel the installation of the PPD you selected,
click Cancel. To try to setup the printer again, repeat step 5
above.
Note:
If QuickDrawGX is installed, you must turn it off in the Extensions
Manager before you can use the Adobe PostScript printer driver.
Using the Printer Driver For Macintosh
4
4
4
4
4
4
4
4
4
4
4
4
135