Epson EPL-6200 Reference Manual page 296

Time Out
Allows you to set the length of time the printer waits before
looking for the next print job. If the printer is online and receives
no new data for the number of seconds specified, the printer
automatically switches to the next channel that receives data. You
can set the timeout value in 1-second increments (the parameters
are from 0 to 300).
Parallel I/F Buffer Size
Allows you to specify the amount of memory to be used for
receiving and printing data through the parallel interface. If set
to Maximum, more memory is allocated for receiving data. If set
to Minimum, more memory is allocated for printing data. The
factory default setting is Normal.
USB I/F Buffer Size
Allows you to specify the amount of memory to be used for
receiving and printing data through the USB interface. If set to
Maximum, more memory is allocated for receiving data. If set to
Minimum, more memory is allocated for printing data. The
factory default setting is Normal.
AUX I/F Buffer Size
Allows you to specify the amount of memory to be used for
receiving and printing data through the optional interface card.
If set to Maximum, more memory is allocated for receiving data.
If set to Minimum, more memory is allocated for printing data.
The factory default setting is Normal.
Using the Remote Control Panel Utility (EPL-6200 only)
7
7
7
7
7
7
7
7
7
7
7
7
279