Interfaces; Parallel Interface - Epson EPL-6200 Reference Manual

Emulation name
in PJL:
in EJL:
AppleTalk protocol
Entity Type:
Emulation Type: POSTSCRIPT-00
Hardware requirements
Your printer must meet the following hardware requirements to
be able to use the PostScript 3 printer driver.
Memory requirements for using the PostScript 3 printer
driver are shown below. Install optional memory modules
into your printer if the amount of memory currently installed
does not meet your printing needs.
Minimum memory
8 MB*
(for a simple print job at 300 dpi)
* Printing may not be possible with this amount of memory, depending on the
specifics of the job being printed.

Interfaces

Parallel interface

Use only an IEEE 1284-B compliant parallel connector.
424
Technical Specifications
POSTSCRIPT
PS
LaserWriter
Recommended memory
40 MB or more