Epson EPL-6200 Reference Manual page 416

Font and image problems
The font on the printout is different from that on the screen.
Cause
The PostScript screen fonts are
not installed.
The Send TrueType fonts to
printer according to the
Font Substitution Table
setting on the Fonts sheet of
the printer's Properties dialog
box is turned on, but the
TrueType fonts are not
replaced by the printer fonts.
The printer fonts cannot be installed.
Cause
The emulation mode is not set
to PS3 for the interface that you
are using.
What to do
The PostScript screen fonts must be
installed on the computer that you are
using. Otherwise, the font that you select
is substituted by some other font for
display on the screen.
If the Send TrueType fonts to printer
according to the Font Substitution
Table setting on the Fonts sheet of the
printer's Properties dialog box is turned
on, TrueType fonts are replaced by the
printer fonts before they are printed.
Specify the appropriate substitution
fonts using the Font Substitution Table.
What to do
Change the emulation mode setting to
PS3 for the interface that you are using,
then try reinstalling the printer fonts
again.
Set the emulation mode using the
Remote Control Panel utility. For
details, see "Choosing printer
emulation" on page 262.
Troubleshooting
11
11
11
11
11
11
11
11
11
11
11
11
399