For Dos; Remote Control Panel Utility Overview - Epson EPL-6200 Reference Manual

For DOS

Remote Control Panel utility overview

The Remote Control Panel is a software utility that allows you to
change printer settings, such as the print quality, paper size, and
RITech setting, when these settings cannot be made from your
application or the printer driver.
When to use the Remote Control Panel utility
Note:
Before using this utility, be sure to read the README file located in the
RCP folder in the printer software CD-ROM. (The folder name depends
on the country of purchase.) This file contains important information
about the utility.
The Remote Control Panel utility is the software interface that
allows you to choose the printer emulation mode and make
settings you cannot usually make in the printer driver. In
addition, this utility also allows you to make basic printer settings,
such as the number of copies, paper size, and paper type.
However, you do not have to use the Remote Control Panel utility
to change basic printer settings. You can change basic settings that
affect the final printed output in most application programs, and
any settings you make from your software override those made
from the Remote Control Panel utility. However, if you cannot
change printer settings from your application program or if you
are running DOS, the Remote Control Panel utility will give you
access to such settings.
244
Using the Remote Control Panel Utility (EPL-6200 only)