Selecting Printers To Be Monitored (Epl-6200 Only); Setting For The Usb Connection - Epson EPL-6200 Reference Manual

Selecting printers to be monitored (EPL-6200
only)
You can use "Monitored Printers" utility, to change the type of
printers that EPSON Status Monitor 3 will monitor. When you
install the EPSON Status Monitor 3, this utility is also installed.
Usually, it is not necessary to change a setup. Use this utility when
you want to change the settings for some reason.
1. Click Start, point to Program, point to EPSON Printers, then
click Monitored Printers.
2. Clear the check box of the printers which are not monitored.
3. Click OK.

Setting for the USB Connection

The USB interface that comes with your printer complies with
Microsoft Plug and Play (PnP) USB specifications.
Note:
Only PC systems equipped with a USB connector and running
Windows Me, 98, XP, and 2000 support the USB interface.
106
Using the Printer Driver For Windows