Epson EPL-6200 Reference Manual page 288

ZeroChar
This option allows you to specify whether the printer prints a
slashed zero (Ø) or an unslashed zero (0). This feature is useful for
clearly distinguishing between an uppercase letter O and zero
when printing documents such as program lists.
Font
Allows you to select a font by typeface. The factory default font
is Courier. After selecting the desired font, you can also adjust
the character spacing and size of the font with the Pitch and
Condensed options.
Pitch
You can select a character pitch of 10, 12, or 15 cpi (characters per
inch), or choose proportional spacing.
Alt.Graphics (I239X only)
Turns the Alternate Graphics option on or off. The default setting
is Off.
Character Set (I239X only)
Allows you to select the character table 1 or 2. When set to 1, the
character codes 80h to 9Fh are specified as control codes 00h to
1Fh. When set to 2, the character codes 80h to 9Fh are specified as
normal characters.
Using the Remote Control Panel Utility (EPL-6200 only)
7
7
7
7
7
7
7
7
7
7
7
7
271