[Date And Time] Setting Date And Time - Canon VB-S30D Operating Manual

[Date and Time] Setting Date and Time

The following can be set here.
• Current Date and Time
The date and time set in the camera is shown.
• Setting
Select the date and time setting method, time
zone and daylight saving time for the camera.
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast],
[Synchronize with computer time].
(2) [Date], [Time]
When [Setting Method] is set to [Set manually], you
can set the date and time manually. The date is
entered in year/month/day format, and the time in
hour:minute:second 24-hour format.
(3) [Auto-Setting of NTP Server]
When [Setting Method] is set to [Synchronize with
NTP server], select a DHCP option for the automatic
setting method of the NTP server.
[Disable]
Select when specifying an arbitrary NTP server.
Enter the IP address or host name of the NTP server
used in [NTP Server].
[Use DHCP]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
44
server. In order to set [Use DHCP], you must
change [Network] > [IPv4 Address Setting Method]
to [Auto (DHCP)] (p. 40).
The NTP server address acquired from the DHCP
server will appear in [NTP Server (DHCP)].
[Use DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the
DHCPv6 server. In order to set [Use DHCPv6], you
must change [Network] > [IPv6] to [Enable], then set
[Auto (DHCPv6)] to [Enable] (p. 41).
The NTP server address acquired from the DHCPv6
server will appear in [NTP Server (DHCPv6)].
[Use DHCP/DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
server or DHCPv6 server. If the NTP server address
can be acquired from both the DHCP server (IPv4)
and DHCPv6 server, the NTP server address
acquired from the DHCP server (IPv4) will be used.
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP server
time. The camera will synchronize time with NTP
broadcasts received from the NTP server.
[Synchronize with computer time]
The camera will synchronize with the date and time
of the computer currently accessing the camera.
The [Time Zone] is not selected automatically, and
must be set separately as required.
(4) [Time Zone]
Select from the list the appropriate time difference
from the Greenwich Mean Time.
(5) [Daylight Saving Time]
Select [Enable] to automatically adjust the daylight
saving time according to the time zone or [Disable]
not to automatically adjust the daylight saving time.