Debug Dot1X - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands

debug dot1x

Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication
feature. Use the no form of this command to disable debugging.
Syntax Description all
errors
events
feature
packets
registry
state-machine
Though visible in the command-line help strings, the redundancy keyword is not supported.
Note
Command Default Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines
The undebug dot1x command is the same as the no debug dot1x command.
OL-8916-01
debug dot1x {all | errors | events | feature | packets | registry | state-machine}
no debug dot1x {all | errors | events | feature | packets | registry | state-machine}
Display all IEEE 802.1x authentication debug messages.
Display IEEE 802.1x error debug messages.
Display IEEE 802.1x event debug messages.
Display IEEE 802.1x feature debug messages.
Display IEEE 802.1x packet debug messages.
Display IEEE 802.1x registry invocation debug messages.
Display state-machine related-events debug messages.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
debug dot1x
B-5