Debug Mac-Notification - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

debug mac-notification

debug mac-notification
Use the debug mac-notification privileged EXEC command to enable debugging of MAC notification
events. Use the no form of this command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines The undebug mac-notification command is the same as the no debug mac-notification command.
Related Commands Command
show debugging
show mac
address-table
notification
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-18
debug mac-notification
no debug mac-notification
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Displays the MAC address notification information for all interfaces or the
specified interface.
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands
OL-8916-01