Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 361

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Examples This is an example of output from the show ip igmp snooping querier command:
Switch> show ip igmp snooping querier
Vlan
---------------------------------------------------
120
129
This is an example of output from the show ip igmp snooping querier detail command:
Switch> show ip igmp snooping querier detail
Vlan
-------------------------------------------------------------
1
Global IGMP switch querier status
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
Vlan 1:
--------------------------------------------------------
elected querier is 1.1.1.1
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
operational state
operational version
tcn query pending count
Related Commands Command
ip igmp snooping
ip igmp snooping querier
show ip igmp snooping
OL-8916-01
IP Address IGMP Version
130.1.1.1 v3
172.20.129.1 v2
IP Address IGMP Version
1.1.1.1 v2
: Enabled
: 2
: 0.0.0.0
: 60
: 10
: 120
: 2
: 10
IGMP switch querier status
: Enabled
: 2
: 10.1.1.65
: 60
: 10
: 120
: 2
: 10
: Non-Querier
: 2
: 0
Port
Gi0/20
Gi0/24
Port
Gi0/21
on port Fa0/1
Description
Enables IGMP snooping on the switch or on a VLAN.
Enables the IGMP querier function in Layer 2 networks.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show ip igmp snooping querier
2-335