Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 212

Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs Also See for 3020 - Cisco Catalyst Blade Switch:
Table of Contents

Advertisement

mls qos cos
Examples
This example shows how to configure the default port CoS to 4 on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4
on a port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands
Command
show mls qos interface
Cisco Catalyst Blade Switch 3020 for HP Command Reference
2-184
Chapter 2
Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
Description
Displays quality of service (QoS) information.
OL-8916-01

Advertisement

Table of Contents
loading

Table of Contents