Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 715

Appendix C Cisco Catalyst Blade Switch 3020 for HP Show Platform Commands
transmit {port-fifo | queue |
supervisor-sram} [asic number |
port number [asic number]]
vct [asic number | port number
[asic number]]
version
| begin
| exclude
| include
expression
Note Though visible in the command-line help strings, the stack {control | dest-map | learning | messages |
mvid | prog-parser | span | stats [asic number | port number [asic number]] keywords are not
supported.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEF
OL-8916-01
Display transmit information. The keywords have these meanings:
• port-fifo—Display the contents of the port-FIFO information
register.
• queue—Display the contents of the queue information
register.
supervisor-sram—Display supervisor SRAM information.
•
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.
Display the VLAN compression table entries for the specified
ASIC or for the specified port and ASIC. The keywords have these
meanings:
asic number—(Optional) Display information for the
•
specified ASIC. The range is 0 to 1.
port number—(Optional) Display information for the
•
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
Display version and device type information for port ASICs.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show platform port-asic
C-19