Copy; Delete - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands

copy

Use the copy boot loader command to copy a file from a source to a destination.
Syntax Description -b block-size
filesystem:
/source-file-url
/destination-file-url
Defaults The default block size is 4 KB.
Command Modes
Boot loader
Command History Release
12.2(25)SEF
Usage Guidelines Filenames and directory names are case sensitive.
Directory names are limited to 45 characters between the slashes (/); the name cannot contain control
characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Filenames are limited to 45 characters; the name cannot contain control characters, spaces, deletes,
slashes, quotes, semicolons, or colons.
If you are copying a file to a new directory, the directory must already exist.
Examples This example show how to copy a file at the root:
switch: copy flash:test1.text flash:test4.text
.
File "flash:test1.text" successfully copied to "flash:test4.text"
You can verify that the file was copied by entering the dir filesystem: boot loader command.
Related Commands Command

delete

OL-8916-01
copy [-b block-size] filesystem:/source-file-url filesystem:/destination-file-url
(Optional) This option is used only for internal development and testing.
Alias for a flash file system. Use flash: for the system board flash device.
Path (directory) and filename (source) to be copied.
Path (directory) and filename of the destination.
Modification
This command was introduced.
Description
Deletes one or more files from the specified file system.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
copy
A-5