Cisco 3020 - Catalyst Blade Switch Command Reference Manual page 355

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands
TCN flood query count
Vlan 1:
--------
IGMP snooping
IGMPv2 immediate leave
Explicit host tracking
Multicast router learning mode
CGMP interoperability mode
Vlan 2:
--------
IGMP snooping
IGMPv2 immediate leave
Explicit host tracking
Multicast router learning mode
CGMP interoperability mode
Related Commands Command
ip igmp snooping
ip igmp snooping
last-member-query-interval
ip igmp snooping querier
ip igmp snooping report-suppression
ip igmp snooping tcn
ip igmp snooping tcn flood
ip igmp snooping vlan
immediate-leave
ip igmp snooping vlan mrouter
ip igmp snooping vlan static
show ip igmp snooping groups
show ip igmp snooping mrouter
show ip igmp snooping querier
OL-8916-01
: 2
: Enabled
: Disabled
: Enabled
: pim-dvmrp
: IGMP_ONLY
: Enabled
: Disabled
: Enabled
: pim-dvmrp
: IGMP_ONLY
Description
Enables IGMP snooping on the switch or on a VLAN.
Enables the IGMP snooping configurable-leave timer.
Enables the IGMP querier function in Layer 2 networks.
Enables IGMP report suppression.
Configures the IGMP topology change notification
behavior.
Specifies multicast flooding as the IGMP spanning-tree
topology change notification behavior.
Enables IGMP snooping immediate-leave processing on a
VLAN.
Adds a multicast router port or configures the multicast
learning method.
Statically adds a Layer 2 port as a member of a multicast
group.
Displays the IGMP snooping multicast table for the switch.
Displays IGMP snooping multicast router ports for the
switch or for the specified multicast VLAN.
Displays the configuration and operation information for
the IGMP querier configured on a switch.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show ip igmp snooping
2-329