Debug Sw-Vlan Ifs - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

debug sw-vlan ifs

debug sw-vlan ifs
Use the debug sw-vlan ifs privileged EXEC command to enable debugging of the VLAN manager IOS
file system (IFS) error tests. Use the no form of this command to disable debugging.
Syntax Description open {read | write}
read {1 | 2 | 3 | 4}
write
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines
The undebug sw-vlan ifs command is the same as the no debug sw-vlan ifs command.
When selecting the file read operation, Operation 1 reads the file header, which contains the header
verification word and the file version number. Operation 2 reads the main body of the file, which
contains most of the domain and VLAN information. Operation 3 reads type length version (TLV)
descriptor structures. Operation 4 reads TLV data.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
B-72
debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
no debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
Display VLAN manager IFS file-open operation debug messages. The
keywords have these meanings:
read—Display VLAN manager IFS file-read operation debug messages.
•
write—Display VLAN manager IFS file-write operation debug messages.
•
Display file-read operation debug messages for the specified error test (1, 2, 3,
or 4).
Display file-write operation debug messages.
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands
OL-8916-01