Show Vlan Access-Map; Show Vlan Filter - Cisco 3020 - Catalyst Blade Switch Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands

show vlan access-map

Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
Syntax Description
mapname
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)SEF
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz"
Match clauses:
Action:
Related Commands Command

show vlan filter

vlan access-map
vlan filter
OL-8916-01
show vlan access-map [mapname] [ | {begin | exclude | include} expression]
(Optional) Name of a specific VLAN access map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
10
ip address: SecWiz_Gi0_3_in_ip
ip address: SecWiz_Fa10_3_in_ip
forward
Description
Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
show vlan access-map
2-415